Main Content

Three-Phase Series RLC Branch

Implement three-phase series RLC branch

  • Three-Phase Series RLC Branch block

Libraries:
Simscape / Electrical / Specialized Power Systems / Passives

Description

The Three-Phase Series RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, or a capacitor or a series combination of these. Use the Branch type parameter to select elements you want to include in each branch.

Negative values are allowed for resistance, inductance, and capacitance.

Ports

Conserving

expand all

Specialized electrical conserving port associated with the terminal 1 of phase A.

Specialized electrical conserving port associated with the terminal 1of phase B.

Specialized electrical conserving port associated with the terminal 1 of phase C.

Specialized electrical conserving port associated with the terminal 2 of phase A.

Specialized electrical conserving port associated with the terminal 2of phase B.

Specialized electrical conserving port associated with the terminal 2 of phase C.

Parameters

expand all

To edit block parameters interactively, use the Property Inspector. From the Simulink® Toolstrip, on the Simulation tab, in the Prepare gallery, select Property Inspector.

Elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open circuit to define an open circuit (R=0, L=0, C=inf). Only existing elements are displayed in the block icon.

Branch resistances, in ohms (Ω).

Branch inductances, in henries (H).

Branch capacitances, in farads (F).

Select Branch voltages to measure the three voltages across the Three-Phase Series RLC Branch block terminals.

Select Branch currents to measure the three currents flowing through the Three-Phase Series RLC Branch block.

Select Branch voltages and currents to measure the three voltages and the three currents of the Three-Phase Series RLC Branch block.

Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.

Measurement

Label

Branch voltages

Ua:

Branch currents

Ia:

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced before R2006a