Documentation

Sun-Planet Bevel

Planetary gear set of carrier, beveled planet, and sun wheels with adjustable gear ratio, assembly orientation, and friction losses

Library

Gears/Planetary Subcomponents

Description

The Sun-Planet Bevel gear block represents a set of carrier, planet, and sun gear wheels. The planet is connected to and rotates with respect to the carrier. The planet and sun corotate with a fixed gear ratio and in a direction that you specify. You control the direction by setting the assembly orientation, left or right. A sun-planet and a ring-planet gear are basic elements of a planetary gear set. For model details, see Sun-Planet Bevel Gear Model.

The block models the effects of heat flow and temperature change through an optional thermal port. To expose the thermal port, right-click the block and select Simscape > Block choices > Show thermal port. Exposing the thermal port causes new parameters specific to thermal modeling to appear in the block dialog box.

Dialog Box and Parameters

Main

Planet (P) to sun (S) teeth ratio (NP/NS)

Ratio gPS of the planet gear wheel radius to the sun gear wheel radius. This gear ratio must be strictly greater than 1. The default value is 2.

Assembly orientation

Relative orientation of sun and planet gears, controlling their corotation direction. Left or right orientation imply, respectively, that the gears corotate in the same or opposite direction.

The default is Left — Sun and planet gears rotate in same direction.

Meshing Losses

Parameters for meshing and friction losses vary with the block variant chosen—one with a thermal port for thermal modeling and one without it.

 Without Thermal Port

 With Thermal Port

Viscous Losses

Sun-carrier viscous friction coefficient

Viscous friction coefficient μS for the sun-carrier gear motion. The default is 0.

From the drop-down list, choose units. The default is newton-meters/(radians/second) (N*m/(rad/s)).

Thermal Port

Thermal mass

Thermal energy required to change the component temperature by a single degree. The greater the thermal mass, the more resistant the component is to temperature change. The default value is 50 J/K.

Initial temperature

Component temperature at the start of simulation. The initial temperature influences the starting meshing or friction losses by altering the component efficiency according to an efficiency vector that you specify. The default value is 300 K.

Sun-Planet Bevel Gear Model

Ideal Gear Constraints and Gear Ratios

Sun-Planet Bevel imposes one kinematic and one geometric constraint on the three connected axes:

rCωC = rSωS ± rPωP , rC = rS ± rP .

The planet-sun gear ratio gPS = rP/rS = NP/NS. N is the number of teeth on each gear. In terms of this ratio, the key kinematic constraint is:

ωS = ∓gPSωP + (1 ± gPS)ωC .

The three degrees of freedom reduce to two independent degrees of freedom. The upper or lower sign applies, respectively, to left-oriented or right-oriented bevel assembly. The gear pair is (1,2) = (S,P).

    Warning   The planet-sun gear ratio gPS must be strictly greater than one.

The torque transfer is:

gPSτS + τPτloss = 0 ,

with τloss = 0 in the ideal case.

Nonideal Gear Constraints and Losses

In the nonideal case, τloss ≠ 0. See Model Gears with Losses.

Limitations

  • Gear inertia is assumed negligible.

  • Gears are treated as rigid components.

  • Coulomb friction slows down simulation. See Adjust Model Fidelity.

Ports

PortDescription
CRotational conserving port representing the gear carrier
PRotational conserving port representing the planet gear
SRotational conserving port representing the sun gear
HThermal conserving port for thermal modeling

Examples

These SimDriveline™ example models use the Sun-Planet Bevel gear to create custom gear sets:

Was this topic helpful?